BKD 150 Bayonet Cable Bushing
System BKD 150 fulfils highest requirements. Due to its bayonet
catch it offers a technology for quick and easy installation which
is finished with only 1/12 turn (= 30°). The bayonet cable
bushing BKD 150 is suitable for the application of various
sealing techniques. The standard design is supplied
with heat shrink-on sleeves. As an option, cold
shrink-on sleeves KS are also available. The system
BKD 150 offers compatibility with other systems
and is prepared for numerous special solutions.
System cover for BKD 150
System cover with 1 connection piece and appropriate shrink-on sleeve
a) design for 1 cable of diameter 34 - 108 mm.
b) design for 1 cable of diameter 26 - 78 mm.
System cover with 3 connection pieces and 3 shrink-on sleeves.
Suitable for 3 cables of diameter 21 - 56 mm.
System cover with 7 connection pieces and 7 shrink-on sleeves.
Suitable for 7 cables of diameter 7 - 36 mm.
System cover with 8 connection pieces and 4 shrink-on sleeves.
4 connection pieces are closed upon supply and can be opened when
necessary. Suitable for max. 4 cables of diameter 7 - 23 mm and
max. 4 cables of diameter 12 - 33 mm.
Bayonet Cable Bushing
System BKD 150 with its bayonet catch consists of a sealing collar which is designed as single or double collar and can be assembled into packages by means of the frame around the collar to be imbedded flush into the concrete of the formwork. The frame is provided with nail holes for fixing with stud nails. In order to prevent voids the bayonet cable bushing has to be completely enclosed by concrete.
BKD 150 sealing collars will be supplied fitting to the wall thickness of the structural works and are inserted flush into the formwork.
BKD 150 is provided with protective foils and sealing caps. Thus the interior of the sealing collar stays clean during installation and is gas- and watertight immediately after concreting.
The BKD 150 system covers have a suitable bayonet connection and offer a technology for quick and simple installation which is finished with only 1/12 turn.
Single Sealing Collar suitable for connection of a system cover or
system KSS on one side. Applicable for a wall thickness from 60 mm.
Direction of installation has to be determined!
Single Sealing Collar with pipe connection plug-type sleeve. Suitable for connection of a system cover or system KSS on
one side. Other side for direct connection of a smooth-walled
cable protection tube with an outside diameter of 110, 125, 140
or 160 mm. Minimum wall thickness 200 mm.
Double Sealing Collar Suitable for connection of a system cover or
system KSS on both sides. Applicable for a wall thickness from 100 mm.
Angular Sealing Collar suitable for cables laid at an angle of 30°, 45°
or 60° from any direction. With auxiliary frame and polystyrene wedge. Single or double sealing collar also available as package.
Minimum wall thickness 250 mm.
Aluminium Flange Collar AF suitable to seal up in front of diamond tipped drilled holes in walls or in ceilings. Supplied with flange gasket, protective cover and fastening elements. The connection of a system cover or system KSS is possible. Diameter of diamond tipped drilled hole max. 150 mm. Flange 235 x 235 mm.