Rubber press gasket GPD, GPD (A)-ZS, GPD 2in1, system insert BKD 150-ZS

Sealing for cables and pipes in core bore, pipe-sleeve, sealing sleeve BKD 150

Rubber press gasket GPD

Sealing for cables and pipes in core bore, pipe-sleeve, sealing sleeve BKD 150

GPD rubber press gaskets are used for fast and reliable sealing of cables and pipes. They are universally suitable in the field of electricity, gas and water distribution in building construction and civil engineering. They can be used in core bores, pipe-sleeves and bayonet cable ducts (BKD system).

The rubber washers are pressed together by tightening the hexagon nuts. The pressing pressure causes a safe and durable gas and watertight sealing.


Our products at a glance

Rubber press gasket GPD with fixed and loose flange

GPD 60 mm with fixed and loose flange (F+L) against non-pressing water (W1) or pressing water (W2) for doweling.

Suitable for building entries in floor slabs and walls with sealing membranes according to DIN 18533.
Also available for retrofitting according to DIN 18533.
 
Closed version:
Order No.
GPD(A)/60/F+L/W2/V2A/EPDM
(Z)x(D)


FHRK-Standard 20/30

Split design:
Order No.
GPD(A)/G/60/F+L/W2/V2A/EPDM
(Z)x(D)

FHRK-Standard 20/30

without radial load
 
(A) = outside diameter GPD
≙ inside diameter core bore or pipe-sleeve
(Z) = number of cables/pipes
(D) = diameter of cables/pipes
 

Read more …

Rubber press gasket GPD with interchangeable insert

Split rubber press gasket GPD with interchangeable insert

for exchangeable multiple occupancy, 60 mm for pressures up to 5 bar, with interchangeable insert Ø 65 to 125 mm, metal parts A2 stainless steel

For inner diameter of core bore or pipe-sleeve 100 mm
(Z) = number of cables
(D) = diameter of the individual cables

Max. For the number of cables and the diameter of the assignment, see the assignment table in the PDF brochure on page 4 below.

Application: Waterproof concrete stress class 1 and 2 or on-site pipe-sleeve.

FHRK-Standard 20/30/40/60

without radial load

 

Variants Interchangeable insert Ø Drawings
GPD100/G/60/WE65/V2A/EPDM
(Z)x(D)
65 mm  
GPD125/G/60/WE65/V2A/EPDM
(Z)x(D)
85 mm  
GPD150/G/60/WE65/V2A/EPDM
(Z)x(D)
110 mm GPD150_G_2_WE110_ZxD.pdf
GPD200/G/60/WE65/V2A/EPDM
(Z)x(D)
125 mm  

Read more …

Rubber press gasket GPD 30 mm

Diveded version

Assembly is only possible during the installation work!

Order-No.
GPD(A)/30/V2A/EPDM
(Z)x(D)

(A) = Outer diameter GPD
≙ Inner diameter core bore or pipe-sleeve
(D) = Diameter tube (Øa)
 
Application: Waterproof concrete stress class 1 and 2 or on-site pipe-sleeve.
 
FHRK-Standard 20/30
 

Read more …

Rubber press gasket GPD 30 mm

Split version

Assembly is also possible after the installation work!

Application: Waterproof concrete stress class 1 and 2 or on-site pipe-sleeve.

Order-No.
GPD(A)/G/30/V2A/EPDM
1x(D)
 
(A) = Outer diameter GPD
≙ Inner diameter core bore or pipe-sleeve
(D) = Diameter tube (Øa)

Read more …

Rubber press gasket GPD 30 mm

Split version

Assembly is also possible after the installation work!

Application: Waterproof concrete stress class 1 and 2 or on-site pipe-sleeve.

Order-No.
GPD(A)/G/30/V2A/EPDM
(Z)x(D)
 
(A) = Outer diameter GPD
≙ Inner diameter core bore or pipe-sleeve
(Z) = Number of cables
(D) = Diameter of the individual cables

Max. For the number of cables and the diameter of the assignment, see the assignment table in the PDF brochure on page 4 below.

Read more …

Rubber press gasket GPD 60 mm

Closed version

Assembly is only possible during the installation work!

Order-No.
GPD(A)/60/V2A/EPDM
1x(D)
 
(A) = Outer diameter GPD
≙ Inner diameter core bore or pipe-sleeve
(D) = Diameter tube (Øa)
 
Application: Waterproof concrete stress class 1 and 2 or on-site pipe-sleeve.
 
FHRK-Standard 20/30/40/60
 

Read more …

Rubber press gasket GPD 60 mm

Closed version

Assembly only possible during installation work!

Order-No.
GPD(A)/60/V2A/EPDM
(Z)x(D)
 
(A) = Outside diameter GPD
≙ Inside diameter core bore or pipe-sleeve
tube (Z) = Number of cables
(D) = Diameter of individual cables

Max. For the number of cables and the diameter of the assignment, see the assignment table in the PDF brochure on page 4 below.

Application: Waterproof concrete stress class 1 and 2 or on-site pipe-sleeve.

FHRK-Standard 20/30/40/60

Read more …

Rubber press gasket GPD 60 mm

Split version
Assembly is also possible after the installation work!
 
Order-No.
GPD (A)/G/60/V2A/EPDM
1x(D)
 
(A) = Outer diameter GPD
≙ Inner diameter core bore or pipe-sleeve
(D) = Diameter tube (Øa)
 
Application: Waterproof concrete stress class 1 and 2 or on-side sleeve pipe.
 
FHRK-Standard 20/30/40/60
 
without radial load

Drawing_GPD150_G_2_1x110.pdf

Read more …

Interchangeable insert only WE.../ZxD

Interchangeable insert WE 110, Ø = 65 to 125 mm.

Application: In existing rubber press gasket (see 2 columns).

Variants Matching GPD Max. Assignment, different Ø possible
WE65/G/60/EPDM
(Z)x(D)
GPD100/G/60
1x65
3 x Ø 22 or 5 x Ø 17 or 9 x Ø 12
WE85/G/60/EPDM
(Z)x(D)
GPD125/G/60
1x85
3 x Ø 50 or 5 x Ø 38 or 8 x Ø 30
WE110/G/60/EPDM
(Z)x(D)
GPD150/G/60
1x110
3 x Ø 42 or 5 x Ø 34 or 9 x Ø 24
WE125/G/60/EPDM
(Z)x(D)
GPD200/G/60
1x125
3 x Ø 50 or 5 x Ø 38 or 8 x Ø 30
 
(Z) = number of cables
(D) = diameter of the individual cables

Read more …

Onion-cut insert ZS

Onion-cut insert ZS,
split, EPDM rubber 40 mm, drilled in onion-cut technique. Can be combined with 1-layer rubber press gaskets!

Application: In existing rubber press gasket.

Variants Cabel-Ø
ZS/G/40/EPDM
(4-20)
4-20 mm
ZS/G/40/EPDM
(4-25)
4-25 mm
ZS/G/40/EPDM
(4-32)
4-32 mm
ZS/G/40/EPDM
(22-54)
22-54 mm

 

 

Read more …

Rubber press gasket GPD with overlapping flange

GPD with overlapping flange
in closed or split design. 30 mm for pressures up to 2.5 bar or 60 mm for pressures up to 5 bar available.
 
Application: Waterproof concrete stress class 1 and 2.
 
Closed version:
Order-No.
GPD(A)/(30or60)/F/V2A/EPDM
(Z)x(D)
 
FHRK-Standard 20/30
 
Split version:
Order-No.
GPD(A)/G/(30or60)/F/V2A/EPDM
(Z)x(D)
 
only GPD(A)/G/60/F/V2A/EPDM (Z)x(D) with FHRK-Standard 20/30
 
without radial load
 
(A) = Outside diameter GPD
≙ Inside diameter of core bore or pipe-sleeve
(Z) = Number of cables/pipes
(D) = Diameter of cables/pipes
 

Read more …

Rubber press gasket GPD 60 mm

Split version
Assembly is also possible after the installation work!
 
Order-No.
GPD(A)/G/60/V2A/EPDM
(Z)x(D)
(A) = Outer diameter GPD
≙ Inner diameter core bore or pipe-sleeve
(Z) = Number of cables
(D) = Diameter of the individual cables
 
Application: Waterproof concrete stress class 1 and 2 or on-side sleeve pipe.
 
FHRK-Standard 20/30/40/60
without radial load

Drawing_GPD150_G_2_2x40+1x32+1x25.pdf

Read more …

Accessories

Cable cleaner KR in 1 litre container, odourless and residue-free, marking Xn.
 
Order-No. KR

Read more …

Accessories

Cable cleaning cloths KR-5T,
5 cable cleaning cloths 30 cm x 21 cm in a foil bag, odourless and residue-free, no labelling required.
 
Order-No. KR-5T

 

Read more …

Accessories

Metal box with the following contents:
- Torque wrench 4-20 Nm, 1/4 inch
- Extension 1/4 inch 150 mm
- Socket wrench SW 10 (M6) long version
- Socket wrench SW 13 (M8) long version
 
Order-No. Mounting set GPD/RRD

Read more …

Accessories

Torque screwdriver 5 Nm
with fixed torque setting.
Incl. torque adapter blade 1/4" and socket wrench insert SW 10 long version.
 
Order-No. DMS 5Nm

 

Read more …

Rubber Press Seal GPD 125 with onion-cut

Rubber press gasket GPD 125-ZS, split, suitable for retrofitting in a core bore or pipe-sleeve with Øi 125 mm.

Application: Waterproof concrete stress class 1 and 2 or on-site pipe-sleeve.
Advantages:
  • Simple assembly due to separation of GPD base body and onion cutting inserts
  • High flexibility in adapting onion cutting inserts to cables and pipes
  • split insert for mounting after cable laying
  • High variety of variants for every application
Tightness: gas -watertight up to 2 bar

 

Onion cut inserts: Number of inserts x (diameter)

Variants Onion-cut Drawings
GPD125/G/40/ZS/V2A/EPDM
1x(22-54)
1x(22-54) GPD125-ZS_1x(22-54)_LA.pdf
GPD125/G/40/ZS/V2A/EPDM
3x(4-32)
3x(4-32) GPD125-ZS_3x(4-32)_LA-1.pdf
GPD125/G/40/ZS/V2A/EPDM
6x(4-25)
6x(4-25) GPD125-ZS_6x(4-25)_LA.pdf
GPD125/G/40/ZS/V2A/EPDM
10x(4-20)
10x(4-20)  

 

 

Read more …

Rubber Press Seal GPD 150 with onion-cut

Rubber press gasket GPD 150-ZS, split, suitable for retrofitting in a core bore or pipe-sleeve with Øi 150 mm.

Application: Waterproof concrete stress class 1 and 2 or on-site pipe-sleeve.
Advantages:
  • Simple assembly due to separation of GPD base body and onion cutting inserts
  • High flexibility in adapting onion cutting inserts to cables and pipes
  • split insert for mounting after cable laying
  • High variety of variants for every application
Tightness: gas -watertight up to 2 bar

 

Onion cut inserts: Number of inserts x (diameter)

Variants Onion-cut Drawings
GPD150/G/40/ZS/V2A/EPDM
3x(22-54)
3x(22-54) GPD150-ZS-3x(22-54)-LA.pdf
GPD150/G/40/ZS/V2A/EPDM
6x(4-32)
6x(4-32)  
GPD150/G/40/ZS/V2A/EPDM
9x(4-25)
9x(4-25) GPD150-ZS_9x(4-25)_LA.pdf
GPD150/G/40/ZS/V2A/EPDM
4x(4-32)+6x(4-20)
4x(4-32)+6x(4-20) GPD150-ZS_4x(4-32)+6x(4-20)_LA_.pdf

 

 

 

 

 

 

 

Read more …

Rubber Press Seal GPD 160 with onion-cut

Rubber press gasket GPD-ZS, split, suitable for retrofitting in a core bore or pipe-sleeve with Øi 160 mm.

Application: Waterproof concrete stress class 1 and 2 or on-site pipe-sleeve.
Advantages:
  • Simple assembly due to separation of GPD base body and onion cutting inserts
  • High flexibility in adapting onion cutting inserts to cables and pipes
  • split insert for mounting after cable laying
  • High variety of variants for every application
Tightness: gas -watertight up to 2 bar

 

Onion cut inserts: Number of inserts x (diameter)

Variants Onion-cut
GPD160/G/40/ZS/V2A/EPDM
3x(22-54)
3x(22-54)
GPD160/G/40/ZS/V2A/EPDM
6x(4-32)
6x(4-32)
GPD160/G/40/ZS/V2A/EPDM
9x(4-25)
9x(4-25)
GPD160/G/40/ZS/V2A/EPDM
4x(4-32)+6x(4-20)
4x(4-32)+6x(4-20)

Download:

Read more …

Rubber Press Seal GPD 200 with onion-cut

Rubber press gasket GPD 200-ZS, split, suitable for retrofitting in a core bore or pipe-sleeve with Øi 200 mm.

Application: Waterproof concrete stress class 1 and 2 or on-site pipe-sleeve.
Advantages:
  • Simple assembly due to separation of GPD base body and onion cutting inserts
  • High flexibility in adapting onion cutting inserts to cables and pipes
  • split insert for mounting after cable laying
  • High variety of variants for every application
Tightness: gas -watertight up to 2 bar

 

Onion cut inserts: Number of inserts x (diameter)

Variants Onion-cut Drawings
GPD200/G/40/ZS/V2A/EPDM
3x(22-54)+4x(4-25)+3x(4-20)
3x(22-54)+4x(4-25)+3x(4-20) GPD 200-ZS/3x(22-54)+4x(4-25)+3x(4-20)-LA
GPD200/G/40/ZS/V2A/EPDM
7x(4-32)+8x(4x20)
7x(4-32)+8x(4x20) GPD 200-ZS/7x(4-32)+8x(4x20)-LA

Download:

Read more …

Rubber Press Seal GPD 80 with onion-cut

Rubber press gasket GPD 80-ZS, split, suitable for retrofitting in a core bore or pipe-sleeve with Øi 80 mm.

Application: Waterproof concrete stress class 1 and 2 or on-site pipe-sleeve.
Advantages:
  • Simple assembly due to separation of GPD base body and onion cutting inserts
  • High flexibility in adapting onion cutting inserts to cables and pipes
  • split insert for mounting after cable laying
  • High variety of variants for every application
Tightness: gas -watertight up to 2 bar

 

Onion cut inserts: Number of inserts x (diameter)

Variants Onino-cut Drawings
GPD80/G/40/ZS/V2A/EPDM
1x(4-32)
1x(4-32) GPD80-ZS_1x(4-32)_LA.pdf
GPD80/G/40/ZS/V2A/EPDM
2x(4-25)
2x(4-25) GPD80-ZS_2x(4-25)_LA.pdf
GPD80/G/40/ZS/V2A/EPDM
3x(4-20)
3x(4-20) GPD80-ZS_3x(4-20)_LA.pdf

Download:

Read more …

Rubber Press Gasket GPD 2in1

Rubber press gasket GPD-2in1,
2-stage, closed, metal parts made of A2 stainless steel.
 
Stage 1 (pipe seal):
EPDM rubber 60 mm, with 1 drill hole Ø 63 mm.
 
Stage 2 (sealing cable):
EPDM rubber 30 mm, with interchangeable insert Ø 54 mm and Z bores Ø D mm.

Application: Waterproof concrete stress class 1 and 2 or on-site pipe-sleeve.

Core bore/casing pipe Ø 100 mm
interchangeable insert Ø 54 mm
 
Variants:
GPD100/90/2in1/63/WE54/V2A/EPDM
(Z)x(D)
 
GPD125/90/2in1/75/WE65/V2A/EPDM
(Z)x(D)
 
GPD150/90/2in1/110/WE85/V2A/EPDM
(Z)x(D)
 
(Z) = Number of cables
(D) = Measured outside diameter of cable
 
Max. Assignment:
e.g. nine cables Ø up to 8 mm
Other combinations with different diameters are also possible.

Read more …