Rubber press seal GPD, GPD (A)-ZS, GPD 2in1, system insert BKD 150-ZS

Sealing for cables and pipes in core drillings, wall sleeves, bayonet cable entries

Rubber press seal GPD

Sealing for cables and pipes in core drillings, wall sleeves, bayonet cable entries BKD 150

GPD rubber press seals are used for the quick and reliable sealing of cables and pipes. They are suitable for universal use in the field of electricity and water supply in civil engineering. They can be used in core drillings made of watertight concrete (BKL-1 and -2), wall sleeves and bayonet cable entries (BKD system).

By tightening the hexagonal nuts, the rubber washers are pressed together. The pressure creates a secure and permanent seal against the ingress of gas and water.


Our products at a glance

Rubber press seal GPD with fixed and loose flange

60 mm layer with fixed and loose flange (F+L) against non-pressurised water (W1) or pressurised water (W2) for dowelling.

Suitable for building connections in floor panels and walls with sealing frames in accordance with DIN 18533 (previously DIN 18195)

 
Closed version:
Order No.
GPD(A)/60/F+L/W(1/2)/V2A/EPDM
(Z)x(D)


FHRK-Standard 20/30
 
 
Also available for retrofitting based on DIN 18533.

Split design:
Order No.
GPD(A)/G/60/F+L/W(1/2)/V2A/EPDM
(Z)x(D)

FHRK-Standard 20/30

without radial load
 
(A) = outside diameter GPD
≙ inside diameter core drilling or wall sleeve
(Z) = number of cables/pipes
(D) = diameter of cables/pipes
 

Read more …

Rubber press seal GPD 30 mm /Single

Closed version

Assembly only possible during installation work.

Order-No.
GPD(A)/30/V2A/EPDM
(1)x(D)

(A) = Outside diameter GPD
≙ Inside diameter core drilling or wall sleeve
(D) = Diameter of pipe (Øa)
 
Application: Can be used in core drillings made of watertight concrete (BKL-1 and -2), wall sleeves and bayonet cable entries (BKD system).
FHRK-Standard 20/30
 

Read more …

Rubber press seal GPD 30 mm /Single

Split version

Assembly also possible after installation work.

Application: Can be used in core drillings made of watertight concrete (BKL-1 and -2), wall sleeves and bayonet cable entries (BKD system).

Order-No.
GPD(A)/G/30/V2A/EPDM
1x(D)
 
(A) = Outside diameter GPD
≙ Inside diameter core drilling or wall sleeve
(D) = Diameter pipe (Øa)

Read more …

Rubber press seal GPD 30 mm /Multiple

Split version

Assembly also possible after installation work.

Application: Can be used in core drillings made of watertight concrete (BKL-1 and -2), wall sleeves and bayonet cable entries (BKD system).

Order-No.
GPD(A)/G/30/V2A/EPDM
(Z)x(D)
 
(A) = Outside diameter GPD
≙ Inside diameter core drilling or wall sleeve
(Z) = Number of cables
(D) = Diameter of the individual cables

Max. For the number of cables and the diameter of the assignment, see the assignment table in the PDF brochure on page 4 below.

Read more …

Rubber press seal GPD 60 mm /Single

Closed version

Assembly only possible during installation work.

Order-No.
GPD(A)/60/V2A/EPDM
1x(D)
 
(A) = Outside diameter GPD
≙ Inside diameter core drilling or wall sleeve
(D) = Diameter pipe (Øa)
 
Application: Can be used in core drillings made of watertight concrete (BKL-1 and -2), wall sleeves and bayonet cable entries (BKD system).
 
FHRK-Standard 20/30/40/60
 

Read more …

Rubber press seal GPD 60 mm /Multiple

Closed version

Assembly only possible during installation work.

Order-No.
GPD(A)/60/V2A/EPDM
(Z)x(D)
 
(A) = Outside diameter GPD
≙ Inside diameter core drilling or wall sleeve
(Z) = Number of cables
(D) = Diameter of individual cables

Max. For the number of cables and the diameter of the assignment, see the assignment table in the PDF brochure on page 4 below.

Application: Can be used in core drillings made of watertight concrete (BKL-1 and -2), wall sleeves and bayonet cable entries (BKD system).

FHRK-Standard 20/30/40/60

Read more …

Rubber press seal GPD 60 mm /Single

Split version
 
Assembly also possible after installation work.
 
Order-No.
GPD (A)/G/60/V2A/EPDM
1x(D)
 
(A) = Outside diameter GPD
≙ Inside diameter core drilling or wall sleeve
(D) = Diameter pipe (Øa)
 
Application: Can be used in core drillings made of watertight concrete (BKL-1 and -2), wall sleeves and bayonet cable entries (BKD system).
 
FHRK-Standard 20/30/40/60
 
without radial load

Drawing_GPD150_G_2_1x110.pdf

Read more …

Rubber press seal with exchangeable insert GPD-WE

Our rubber press seal with exchangeable insert offer maximum flexibility. The split rubber press seal can be mounted regardless of the subsequent configuration. Depending on the cable or pipe configuration, a corresponding exchangeable insert is used. A change of configuration is possible at any time by replacing the exchangeable insert.

Application: Can be used in core drillings made of watertight concrete (BKL-1 and -2), wall sleeves and bayonet cable entries (BKD system).

Variants Exchangeable insert
Max. Assignment, different Ø possible
GPD100/G/60/WE65/V2A/EPDM
(Z)x(D)
WE 65 3 x Ø 22 or 5 x Ø 17 or 9 x Ø 12
GPD125/G/60/WE85/V2A/EPDM
(Z)x(D)
WE 85 3 x Ø 50 or 5 x Ø 38 or 8 x Ø 30
GPD150/G/60/WE110/V2A/EPDM
(Z)x(D)
WE 110 3 x Ø 42 or 5 x Ø 34 or 9 x Ø 24
GPD200/G/60/WE125/V2A/EPDM
(Z)x(D)
WE 125 3 x Ø 50 or 5 x Ø 38 or 8 x Ø 30
 
Order-No.
GPD(A)/G/60/WE/(A1)/V2A/EPDM
(Z)x(D)
 
(A) = Outside diameter of GPD
= Inside diameter of the core drilling
or wall sleeve
(A1)= Diameter of the exchangeable insert
(Z) = Number of cables/pipes
(D) = Diameter of the cables/pipe

Read more …

Multilayer insert ZS

Multilayer insert in split version also suitable for retrofitting, can be combined with single-layer rubber press seals.

Application: In existing rubber press gasket.

Variants Cabel-Ø
ZS/G/40/EPDM
(4-20)
4-20 mm
ZS/G/40/EPDM
(4-25)
4-25 mm
ZS/G/40/EPDM
(4-32)
4-32 mm
ZS/G/40/EPDM
(22-54)
22-54 mm

 

 

Read more …

Rubber press seal GPD with overlaying flange

GPD with overlaying flange, as closed or split version. 30 mm for pressures up to 2.5 bar or 60 mm for pressures up to 5 bar available.
 
Application: Waterproof concrete stress class 1 and 2.
 
Closed version:
Order-No.
GPD(A)/(30/60)/F/V2A/EPDM
(Z)x(D)
 
FHRK-Standard 20/30
 
Split version:
Order-No.
GPD(A)/G/(30/60)/F/V2A/EPDM
(Z)x(D)
 
only GPD(A)/G/60/F/V2A/EPDM (Z)x(D) with FHRK-Standard 20/30
 
without radial load
 
(A) = Outside diameter GPD
≙ Inside diameter of core drilling or wall sleeve
(Z) = Number of cables/pipes
(D) = Diameter of cables/pipes
 

Read more …

Rubber press seal GPD 60 mm /Multiple

Split version
Assembly also possible after installation work.
 
Order-No.
GPD(A)/G/60/V2A/EPDM
(Z)x(D)
(A) = Outside diameter GPD
≙ Inside diameter core drilling or wall sleeve
(Z) = Number of cables
(D) = Diameter of the individual cables
 
Application: Can be used in core drillings made of watertight concrete (BKL-1 and -2), wall sleeves and bayonet cable entries (BKD system).
 
FHRK-Standard 20/30/40/60
without radial load

Drawing_GPD150_G_2_2x40+1x32+1x25.pdf

Read more …

Accessories

Cable cleaner KR in 1 litre container, for environmentally friendly cleaning of cables of all kinds.
 
Order-No. KR

Read more …

Accessories

Cable cleaning cloths KR-5T,
5 cable cleaning cloths 30 cm x 21 cm in a foil bag, odourless and residue-free, no labelling required.
 
Order-No. KR-5T

 

Read more …

Accessories

Metal box with the following contents:
- Torque wrench 4-20 Nm, 1/4 inch
- Extension 1/4 inch 150 mm
- Socket wrench SW 10 (M6) long version
- Socket wrench SW 13 (M8) long version
 
Order-No. Mounting set GPD/RRD

Read more …

Accessories

Torque screwdriver 5 Nm
with fixed torque setting.
Incl. torque adapter blade 1/4" and socket wrench insert SW 10 long version.
 
Order-No. DMS 5Nm

 

Read more …

Rubber Press Seal GPD 100 with multilayer inserts ZS

Rubber press seal GPD 100-ZS, split, suitable for retrofitting in a core drilling or wall sleeve with Øi 100 mm.

Application: Can be used in core drillings made of watertight concrete (BKL-1 and -2), wall sleeves and bayonet cable entries (BKD system).
Advantages:
  • Simple assembly due to separation of GPD base body and multilayer inserts
  • Sealing of up to 15 cables of various diameters possible
  • Suitable for subsequent installation of cables already laid: Split version
  • Slip protection in the form of two-layer tabs or bayonet catch
Tightness: Gas- and watertight up to 2.5 bar

 

Multilayer inserts: Number of inserts x (diameter)

Variants Multilayer inserts Drawings
GPD100/G/40/ZS/V2A/EPDM
1x(22-54)
1x(22-54) GPD100-ZS_1x(22-54)
GPD100/G/40/ZS/V2A/EPDM
3x(4-32)
3x(4-32) GPD100-ZS_3x(4-32)
GPD100/G/40/ZS/V2A/EPDM
2x(4-32)+2x(4-25)
2x(4-32)+2x(4-25) GPD100-ZS_2x(4-32)+2x(4-25)
GPD100/G/40/ZS/V2A/EPDM
2x(4-32)+3x(4-20)
2x(4-32)+3x(4-20) GPD100-ZS_2x(4-32)+3x(4-20)
GPD100/G/40/ZS/V2A/EPDM
8x(4-20)
8x(4-20) GPD100-ZS_8x(4-20)

Read more …

Rubber Press Seal GPD 125 with multilayer inserts ZS

Rubber press seal GPD 125-ZS, split, suitable for retrofitting in a core drilling or wall sleeve with Øi 125 mm.

Application: Can be used in core drillings made of watertight concrete (BKL-1 and -2), wall sleeves and bayonet cable entries (BKD system).
Advantages:
  • Simple assembly due to separation of GPD base body and multilayer inserts
  • Sealing of up to 15 cables of various diameters possible
  • Suitable for subsequent installation of cables already laid: Split version
  • Slip protection in the form of two-layer tabs or bayonet catch
Tightness: Gas- and watertight up to 2.5 bar

 

Multilayer inserts: Number of inserts x (diameter)

Variants Multilayer inserts
Drawings
GPD125/G/40/ZS/V2A/EPDM
1x(22-54)
1x(22-54) GPD125-ZS_1x(22-54)_LA.pdf
GPD125/G/40/ZS/V2A/EPDM
3x(4-32)
3x(4-32) GPD125-ZS_3x(4-32)_LA-1.pdf
GPD125/G/40/ZS/V2A/EPDM
6x(4-25)
6x(4-25) GPD125-ZS_6x(4-25)_LA.pdf
GPD125/G/40/ZS/V2A/EPDM
10x(4-20)
10x(4-20)  

 

 

Read more …

Rubber Press Seal GPD 150 with multilayer insert ZS

Rubber press seal GPD 150-ZS, split, suitable for retrofitting in a core drilling or wall sleeve with Øi 150 mm.

Application: Can be used in core drillings made of watertight concrete (BKL-1 and -2), wall sleeves and bayonet cable entries (BKD system).
Advantages:
  • Simple assembly due to separation of GPD base body and multilayer inserts
  • Sealing of up to 15 cables of various diameters possible
  • Suitable for subsequent installation of cables already laid: Split version
  • Slip protection in the form of two-layer tabs or bayonet catch
Tightness: Gas- and watertight up to 2.5 bar

 

Multilayer inserts: Number of inserts x (diameter)

Variants Multilayer inserts Drawings
GPD150/G/40/ZS/V2A/EPDM
3x(22-54)
3x(22-54) GPD150-ZS-3x(22-54)-LA.pdf
GPD150/G/40/ZS/V2A/EPDM
6x(4-32)
6x(4-32)  
GPD150/G/40/ZS/V2A/EPDM
9x(4-25)
9x(4-25) GPD150-ZS_9x(4-25)_LA.pdf
GPD150/G/40/ZS/V2A/EPDM
4x(4-32)+6x(4-20)
4x(4-32)+6x(4-20) GPD150-ZS_4x(4-32)+6x(4-20)_LA_.pdf

Read more …

Rubber Press Seal GPD 160 with multilayer inserts ZS

Rubber press seal GPD-ZS, split, suitable for retrofitting in a core drilling or wall sleeve with Øi 160 mm.

Application: Can be used in core drillings made of watertight concrete (BKL-1 and -2), wall sleeves and bayonet cable entries (BKD system).
Advantages:
  • Simple assembly due to separation of GPD base body and multilayer inserts
  • Sealing of up to 15 cables of various diameters possible
  • Suitable for subsequent installation of cables already laid: Split version
  • Slip protection in the form of two-layer tabs or bayonet catch
Tightness: Gas- and watertight up to 2.5 bar

 

Multilayer inserts: Number of inserts x (diameter)

Variants Multilayer inserts
GPD160/G/40/ZS/V2A/EPDM
3x(22-54)
3x(22-54)
GPD160/G/40/ZS/V2A/EPDM
6x(4-32)
6x(4-32)
GPD160/G/40/ZS/V2A/EPDM
9x(4-25)
9x(4-25)
GPD160/G/40/ZS/V2A/EPDM
4x(4-32)+6x(4-20)
4x(4-32)+6x(4-20)

 

Read more …

Rubber Press Seal GPD 200 with multilayer insert ZS

Rubber press seal GPD 200-ZS, split, suitable for retrofitting in a core drilling or wall sleeve with Øi 200 mm.

Application: Can be used in core drillings made of watertight concrete (BKL-1 and -2), wall sleeves and bayonet cable entries (BKD system).
Advantages:
  • Simple assembly due to separation of GPD base body and multilayer inserts
  • Sealing of up to 15 cables of various diameters possible
  • Suitable for subsequent installation of cables already laid: Split version
  • Slip protection in the form of two-layer tabs or bayonet catch
Tightness: Gas- and watertight up to 2.5 bar

 

Multilayer inserts: Number of inserts x (diameter)

Variants Multilayer inserts Drawings
GPD200/G/40/ZS/V2A/EPDM
3x(22-54)+4x(4-25)+3x(4-20)
3x(22-54)+4x(4-25)+3x(4-20) GPD 200-ZS/3x(22-54)+4x(4-25)+3x(4-20)-LA
GPD200/G/40/ZS/V2A/EPDM
7x(4-32)+8x(4x20)
7x(4-32)+8x(4x20) GPD 200-ZS/7x(4-32)+8x(4x20)-LA

 

Read more …

Rubber Press Seal GPD 80 with multilayer inserts ZS

Rubber press seal GPD 80-ZS, split, suitable for retrofitting in a core drilling or wall sleeve with Øi 80 mm.

Application: Can be used in core drillings made of watertight concrete (BKL-1 and -2), wall sleeves and bayonet cable entries (BKD system).
Advantages:
  • Simple assembly due to separation of GPD base body and multilayer inserts
  • Sealing of up to 15 cables of various diameters possible
  • Suitable for subsequent installation of cables already laid: Split version
  • Slip protection in the form of two-layer tabs or bayonet catch
Tightness: Gas- and watertight up to 2.5 bar

 

Multilayer inserts: Number of inserts x (diameter)

Variants Multilayer inserts Drawings
GPD80/G/40/ZS/V2A/EPDM
1x(4-32)
1x(4-32) GPD80-ZS_1x(4-32)_LA.pdf
GPD80/G/40/ZS/V2A/EPDM
2x(4-25)
2x(4-25) GPD80-ZS_2x(4-25)_LA.pdf
GPD80/G/40/ZS/V2A/EPDM
3x(4-20)
3x(4-20) GPD80-ZS_3x(4-20)_LA.pdf

 

Read more …

Rubber Press Seal GPD 2in1

Rubber press seal GPD 2in1
Simultaneous sealing of the pipe on the outside of the building and sealing of the cables on the inside of the building. Sealing takes place in core drilling made of watertight concrete (BKL-1 and -2) or wall sleeves. The sealing of a process pipe and the sealing of cables can now be carried out with just one seal insert from UGA.

 

Available types:
 
GPD100/90/2in1/(DH)/WE54/V2A/EPDM
(Z)x(D)
Rubber press seal GPD, 2-layer, closed,
Metal parts made from A2 stainless steel
Layer 1: EPDM rubber 60 mm,
with 1 drilled hole for a pipe up to a maximum of 66 mm (DH)
Layer 2: EPDM rubber 30 mm, with exchangeable insert Ø 54 mm
Maximum configuration e.g. 9 cables up to 8 mm.

 
 
GPD125/90/2in1/(DH)/WE65/V2A/EPDM
(Z)x(D)
2-layer rubber press seal GPD, closed,
metal parts made from A2 stainless steel
Layer 1: EPDM rubber 60 mm,
with 1 drilled hole for one pipe up to Ø max. 87 mm (DH)
Layer 2: EPDM rubber 30 mm, with exchangeable insert Ø 65 mm
Maximum configuration e.g. 16 cables up to 8 mm
.
 
 
GPD150/90/2in1/(DH)/WE85/V2A/EPDM
(Z)x(D)
2-layer rubber press seal GPD, closed,
metal parts made from A2 stainless steel
Layer 1: EPDM rubber 60 mm,
with 1 drilled hole for a pipe up to a maximum diameter of 112 mm (DH)
Layer 2: EPDM rubber 30 mm, with exchangeable insert Ø 85 mm
Maximum configuration e.g. 25 cables up to 8 mm
.
 
 
GPD200/90/2in1/(DH)/WE110/V2A/EPDM
Zx(D)
2-layer rubber press seal GPD, closed,
metal parts made from A2 stainless steel
Layer 1: EPDM rubber 60 mm,
with 1 drilled hole for a pipe up to a maximum diameter of 162 mm (DH)
Layer 2: EPDM rubber 30 mm, with exchangeable insert Ø 110 mm
Maximum configuration e.g. 40 cables up to 8 mm
.
 
 
(DH) = Outside diameter of sleeve pipe (Øa)
(Z) = Number of cables
(D) = Outside diameter of cable (Øa)

 

Read more …