Cable duct KD 110

Sealing systems for cables and protection pipes in walls and ceilings

The KD 110 system from UGA

Sealing with a system

The KD 110 system is a proven cable duct with an internal diameter of 110 mm. The KD 110 sealing pack safely seals against pressing water with a minimum installation effort.

The system offers numerous connection options and is compatible with other duct systems. Thermo TM shrink sleeves are supplied as standard with the system cover. KS cold shrink sleeves are optionally available.

Downloads & Information

Prospectus

KD110 Cable entry.pdf (632.9 KiB)

Assembly instruction

Assembly instruction KD 110 system cover.pdf (751.5 KiB)

Assembly instruction (B)KD-AF.pdf (427.9 KiB)

Practical examples & product pictures

Our products at a glance

Accessories

Cable cleaner KR in 1 litre container, odourless and residue-free, marking Xn.

Order-No. KR

KR_cable_cleaner.pdf (307.9 KiB)

Accessories

Cable cleaning cloths KR-5T,

5 cable cleaning cloths 30 cm x 21 cm in a foil bag, odourless and residue-free, no labelling required.

Order-No. KR-5T

Accessories

Hot-melt adhesive tape transparent

Length = 3.00 m, width: 50 mm, thickness: 1 mm.

Order-No. SKB/50x1x3000

Accessories

Face wrench GSS

For the mounting of all system cover and KSS systems.

With an adjustable leg.

Order-No. GSS

Stainless steel flanged sleeve KD110

Stainless steel flanged sleeve

Suitable for sealing according to DIN 18533 (fixed/loose flange construction for black tank). Connection of a system cover or KSS system possible on both sides. Also available as a package (flange plate).

(L) = Wall thickness in mm, Minimum wall thickness 140 mm.

Variants	Flange with Ø		Drawing
KD110-K2-F+L-W2/(L)/V2A	450 mm	pressing water	KD110-K2-F+L-W2_(L).pdf
KD110-K2-F+L-W1/(L)/V2A	270 mm	non-pressing water

KD110 Cable entry.pdf (632.9 KiB)

Single sealing sleeve KD110

Single sealing sleeveing suitable for one-sided connection of a system cover or KSS system.

Usable as of 80 mm wall thickness. The installation direction must be specified!

Application: Waterproof concrete stress class 1 and 2.

Order-No. KD110-K/(L)
(L) = Wall thickness in mm

UGA_Prospekt_KD110.pdf (1.4 MiB)

Single-seal packing with pipe connection sleeve in sleeve technology

Single-seal packing with pipe connection sleeve in sleeve technology

Suitable for one-sided connection of a system lid or KSS system. Opposite side for direct connection of a corrugated or smooth-walled cable conduit with 110 mm outer diameter. Minimum wall thickness 200 mm.

Application: Waterproof concrete stress class 1 and 2.

Variants	clamping range in mm	L = wall thickness
KD110-K-MA115/(L)	100 mm - 115 mm	200-500 mm
KD110-K-MA125/(L)	115 mm - 125 mm	200-500 mm

KD110 Cable entry.pdf (632.9 KiB)

Single-seal packing with push-in socket for pipe connection

Single-seal packing with push-in socket for pipe connection

Suitable for one-sided connection of a system cover or KSS system. Opposite side for the direct connection of a smooth-walled cable conduit with 110, 125 or 160 mm outside diameter. Minimum wall thickness 200 mm.

Order-No. KD110-K-SM110/(L)

Order-No. KD110-K-SM125/(L)

Order-No. KD110-K-SM160/(L)

(L) = wall thickness in mm

Also available as a single sealing sleeve with a pipe connection adhesive sleeve.

Order-No. KD110-K-KM110/(L)

Order-No. KD110-K-KM125/(L)

Order-No. KD110-K-KM160/(L)

(L) = wall thickness in mm

KD110 Cable entry.pdf (632.9 KiB)

Angular flanged sleeve

Angular flanged sleeve suitable for angular cables with an angle of 30º, 45º or 60º. With auxiliary frame and Styrofoam wedge. Single or double sealing sleeve also available as a package.

Application: Waterproof concrete stress class 1 and 2.

(L) = wall thickness in mm, minimum wall thickness 250 mm.

Variants Single inclined sealing sleeve	Angle for both variants	Variants Double inclined sealing sleeve
KD110-K-S30/(L)	30°	KD110-K2-S30/(L)
KD110-K-S45/(L)	45°	KD110-K2-S45/(L)
KD110-K-S60/(L)	60°	KD110-K2-S60/(L)

KD110 Cable entry.pdf (632.9 KiB)

Double sealing sleeve KD110

Cable duct KD 110 UGA cable and pipe ducts. Double sealing sleeve suitable for connecting a system cover or KSS system on both sides.

Usable as of 140 mm wall thickness.

Application: Waterproof concrete stress class 1 and 2.

Order-No. KD110-K2/(L)

(L) = Wall thickness in mm

KD110 Cable entry.pdf (632.9 KiB)

System cover KD110

System cover with one connection piece and one thermal

shrink sleeve Design for one cable with diameter 26 - 78 mm

Application: In existing seal packing KD 110 or KD 110 surface mount flange.

Order-No. KD110-D-1/80-TM

KD110 Cable entry.pdf (632.9 KiB)

System cover KD110

Conical system insert DGM

Made of high-quality EPDM rubber. For connecting a protective cable sleeve with 110 mm outside diameter.

Application: In existing seal packing KD 110 or KD 110 surface mount flange.

Order-No. KD110-D-DGM110

KD110 Cable entry.pdf (632.9 KiB)

System cover KD110

Conical system insert WE

For the sealing of cables. After laying the cables, fold the rubber insert around the cables and push it into the sealing sleeve. Tighten the split union nut with the GSS joint face wrench. Please specify number and diameter of cables when ordering.

Application: In existing seal packing KD110 or KD110 surface mount flange.

All possible variants on request.

Variants	Z = number of holes	D = diameter
KD110-E-WE/V2A/EPDM (Z)x(D)	1 to 28 holes possible	14 to 110 mm possible, depending on number of drill holes

KD110 Cable entry.pdf (632.9 KiB)

System cover KD110

System cover with three connection pieces and three thermal

shrink sleeves Suitable for three cables with diameters 16 - 44 mm.

Various dividing caps AK or sealing plugs VS60 are available as accessories.

Application: In existing seal packing KD 110 or KD 110 surface mount flange.

Order-No. KD110-D-3/46(3/3)-TM

KD110 Cable entry.pdf (632.9 KiB)

System cover KD110

System cover with seven connection pieces and six thermal shrink sleeves

One connection piece is closed when delivered and can be punctured if required. Suitable for a maximum of four cables with diameters 7 - 23 mm and a maximum of three cables with diameters 7 - 30 mm.

Application: In existing seal packing KD 110 or KD 110 surface mount flange.

Various dividing capsAK or sealing plugs VS25 or VS35 are available as accessories.

Order-No. KD110-D-7/32(3/3)/25(4/3)-TM

KD110 Cable entry.pdf (632.9 KiB)

System cover KD110

System cover closed

Blind cover for unused sealing sleeves.

This system cover is included in the scope of delivery of each sealing sleeve.

Application: In existing seal packing KD 110 or KD 110 surface mount flange.

Order-No. KD110-D

KD110 Cable entry.pdf (632.9 KiB)

System cover in sleeve technology KD110-D-MA

System cover BKD 110, in sleeve technology, for connecting pipes Øa 75 to 125 mm (profile sealing rings for corrugated pipes at the construction site).

Application: In existing seal packing KD 110 or KD 110 surface mount flange.

Further versions on request.

Variants	Tubes with Øa
KD110-D-MA65-75	65 mm - 75 mm
KD110-D-MA75-89	75 mm - 89 mm
KD110-D-MA100-115	100 mm - 115 mm
KD110-D-MA115-125	115 mm - 125 mm

KD110 Cable entry.pdf (632.9 KiB)