Cable protection system KSS
Cable protection and flexibility
The KSS cable protection systems from UGA reliably protect cables against moisture and mechanical effects. Their wide range of connection components allow connections to wall inserts, wall sleeves, core drillings and other cable protection hoses and pipes. A gas and water pressure-tight connection of two buildings is possible at any time. No complex earthworks are necessary if cables are added or removed at a later date.
KSS systems are available in diameters of 80, 110, 125 and 150 mm. They are made of mechanically highly resilient, flexible plastic and can be easily encased in concrete. The minimum bending radius is between half a metre and one metre, depending on the hose diameter.

Downloads & Information
Practical examples & product pictures
Our products at a glance
Spacers ASH for KSS hoses
Spacer ASH 2 x 3
For positioning and fixing a maximum of 6 KSS hoses, 3 next to each other and 2 on top of each other.
Order-No. ASH 125/2 x 3 for hose with 110 mm diameter
Order-No. ASH 140/2 x 3 for hose with 125 mm diameter
Order-No. ASH 170/2 x 3 for hose with 150 mm diameter
Spacer ASH 2 x 4
For positioning and fixing a maximum of 8 KSS hoses, 4 next to each other and two on top of each other
Order-No. ASH 90/2 x 4 for hose with 80 mm diameter
Cable protection system KSS 150
Cable protection system KSS 150, flexible plastic spiral hose clear width 150 mm.
- for gas- and watertight laying of cables
- flexible connection with empty conduit systems or cable bushings with a large number of connection elements
The following connection elements are possible with KSS 150:
Connection elements |
Description |
BKD 150-K | Connection of system covers and system inserts of BKD 150. |
BKD 150-D-MA | Connection to bayonet cover with collar BKD 150. |
D1/80 | Connection cover with one connection piece and one thermal shrink sleeve for a cable with a diameter of 26-78 mm. |
D1/110 | Connection cover with one connection piece and one thermal shrink sleeve for a cable with a diameter of 56-108 mm. |
D3/59 | Connection cover with three connection pieces and three thermal shrink sleeves for three cables with diameters of 22-57 mm. |
D7/38 | Connection cover with seven connection pieces and seven thermal shrink sleeves for seven cables with diameters of 7-37 mm. One connection pieces is supplied closed, this can be openend if neccessary. |
D8/35(4/2)/25 (4/2)-TM | Connection cover with four connection pieces and two thermal shrink sleeves for cables with diameters of 7-34 mm and four connection pieces with two thermal shrink sleeves for cables with diameters of 7-24 mm. Two Ø 35 mm and two Ø 25 mm connection pieces are supplied closed, they can be openend if neccessary. |
D8/35(4/2)/25(4/2)-KS | Connection cover with four connection pieces and two cold-shrink sleeves for cables with diameters of 7-34 mm and four connection pieces with two cold-shrink sleeves for cables with diameters of 7-24 mm. Two Ø 35 mm and two Ø 25 mm connection pieces are supplied closed, they can be openend if neccessary. |
R/160 | Bonded PVC pipe piece with an inside diameter of 160 mm suitable to accommodate a sealing element (e.g. GPD, RRD). |
SM/160 | Connection incl. pipe connection sleeve SM 160 (for smooth-walled pipes). |
KM/160 | Connection incl. pipe connection adhesive sleeve KM 160 (for connection of one pipe). |
GPD200 | Bonded PVC pipe piece with an outer diameter of 160 mm on which a GPD 200 is pressed. The component can be used in a core drilling of 199-202 mm. |
RRD200 | Bonded PVC pipe piece with an outer diameter of 160 mm on which a RRD 200 is pressed. The component can be used in a core drilling of 199-202 mm. |
MA (160 - 175)/(160 - 175) | EPDM sleeve for connecting cable protection and conduit systems with an outside diameter of 160-175 mm. |
Cable protection system KSS 125
Cable protection system KSS 125, flexible plastic spiral hose clear width 125 mm.
- for gas- and watertight laying of cables
- flexible connection with empty conduit systems or cable bushings with a large number of connection elements
The following connection elements are possible with KSS 125:
Connection elements
|
Description
|
BKD 150-K
|
Connection of system covers and system inserts of BKD 150.
|
BKD 150-D-MA
|
Connection to bayonet cover with collar BKD 150.
|
D1/80
|
Connection cover with one connection piece and one thermal shrink sleeve for a cable with a diameter of 26-78 mm.
|
D1/110
|
Connection cover with one connection piece and one thermal shrink sleeve for a cable with a diameter of 56-108 mm.
|
D3/59
|
Connection cover with three connection pieces and three thermal shrink sleeves for cables with diameters of 22-57 mm.
|
D7/38
|
Connection cover with seven connection pieces and seven thermal shrink sleeves for cables with diameters of 7-37 mm. One connection piece is supplied closed, this can be openend if neccessary.
|
D8/35(4/2)/25 (4/2)-TM
|
Connection cover with four connection pieces and two thermal shrink sleeves for cables with diameters of 7-34 mm and four connection pieces with two thermal shrink sleeves for cables with diameters of 7-24 mm. Two Ø 35 mm and two Ø 25 mm connection pieces are supplied closed, they can be openend if neccessary.
|
D8/35(4/2)/25(4/2)-KS
|
Connection cover with four connection pieces and two cold-shrink sleeves for cables with diameters of 7-34 mm and four connection pieces with two cold-shrink sleeves for cables with diameters of 7-24 mm. Two Ø 35 mm and two Ø 25 mm connection pieces are supplied closed, they can be openend if neccessary.
|
R/125
|
Bonded PVC pipe piece with an inside diameter of 125 mm suitable to accommodate a sealing element (e.g. GPD, RRD).
|
SM/125
|
Connection incl. pipe connection sleeve SM 125 (for smooth-walled pipes).
|
KM/125
|
Connection incl. pipe connection adhesive sleeve KM 125 (for connection of one pipe).
|
GPD200
|
Bonded PVC pipe piece with an outer diameter of 160 mm on which a GPD 200 is pressed. The component can be used in a core drilling of 199-202 mm.
|
RRD200
|
Bonded PVC pipe piece with an outer diameter of 160 mm on which a RRD 200 is pressed. The component can be used in a core drilling of 199-202 mm.
|
MA (120 - 137)/(120 - 137)
|
EPDM sleeve for connecting cable protection and conduit systems with an outside diameter of 120-137 mm.
|
Cable protection system KSS 110
Cable protection system KSS 110, flexible plastic spiral hose clear width 110 mm.
- for gas- and watertight laying of cables
- flexible connection with empty conduit systems or cable bushings with a large number of connection elements
The following connection elements are possible with KSS 110:
Connection elements
|
Description
|
BKD 150-K
|
Connection of system covers and system inserts of BKD 150.
|
KD 110-K
|
Connection of system covers and system inserts from KD 110.
|
BKD 150-D-MA
|
Connection to bayonet cover with collar BKD 150.
|
KD 110-D-MA
|
Connection to system cover with collar KD 110.
|
D1/80
|
Connection cover with one connection piece and one thermal shrink sleeve for a cable with a diameter of 26-78 mm.
|
D1/110
|
Connection cover with one connection piece and one thermal shrink sleeve for a cable with a diameter of 56-108 mm.
|
D3/46
|
Connection cover with three connection pieces and three thermal shrink sleeves for cables with diameters of 16-44 mm.
|
D7/32/25
|
Connection cover with seven connection pieces and six thermal shrink sleeves. Four connection pieces for cables with diameters of 7-23 mm and three connection pieces for cables with diameters of 7-30 mm. One connection piece is supplied closed, this can be openend if neccessary.
|
R/110
|
Bonded PVC pipe piece with an inside diameter of 110 mm suitable to accommodate a sealing element (e.g. GPD, RRD).
|
SM/110
|
Connection incl. pipe connection sleeve SM 110 (for smooth-walled pipes).
|
SM/125
|
Connection incl. pipe connection sleeve SM 125 (for smooth-walled pipes).
|
KM/110
|
Connection incl. pipe connection adhesive sleeve KM 110 (for connection of one pipe).
|
KM/125
|
Connection incl. pipe connection adhesive sleeve KM 125 (for connection of one pipe).
|
GPD150
|
Bonded PVC pipe piece with an outer diameter of 150 mm on which a GPD 200 is pressed. The component can be used in a core drilling of 149-152 mm.
|
RRD150
|
Bonded PVC pipe piece with an outer diameter of 150 mm on which a RRD 200 is pressed. The component can be used in a core drilling of 149-152 mm.
|
MA (105 - 120)/(105 - 120)
|
EPDM sleeve for connecting cable protection and conduit systems with an outside diameter of 105-120 mm.
|
Cable protection system KSS 80
Cable protection system KSS 80, flexible plastic spiral hose clear width 80 mm.
- for gas- and watertight laying of cables
- flexible connection with empty conduit systems or cable bushings with a large number of connection elements
The following connection elements are possible with KSS 150:
Connection elements | Description |
BKD 90-K | Connection of system covers and system inserts from BKD 90. |
BKD 90-D-MA | Connection to bayonet cover with collar BKD 90. |
D1/75 | Connection cover with one connection piece and one thermal shrink sleeve for a cable with a diameter of 24-74 mm. |
D3/30 | Connection cover with three connection pieces and three thermal shrink sleeves for cables with diameters of 12-29 mm. |
D5/20 | Connection cover with five connection pieces and five thermal shrink sleeves for cables with diameters of 7-19 mm. |
GPD125 | Bonded PVC pipe piece with an outer diameter of 80 mm on which a GPD 125 is pressed. The component can be installed in a core drilling of 124-127 mm. |
RRD125 | Bonded PVC pipe piece with an outer diameter of 80 mm on which a RRD 125 is pressed. The component can be installed in a core drilling of 124-127 mm. |
MA (75 - 89)/(75 - 89) | EPDM sleeve for connecting cable protection and conduit systems with an outer diameter of 75-89 mm. |