Roof ducts

Gooseneck duct SHDD, Roof duct MSD/MFD,
Trapezoidal sheet metal roof duct TDD, Flat roof duct FDD

Roof ducts

Multiple saddle roof duct, multiple flat roof duct

Multiple saddle roof ducts MSD are used to lay cables through saddle roofs, for example, to mobile phone systems, photovoltaic systems, solar systems or TV antennas.

You will receive UGA multiple saddle roof ducts suitable for almost all roof coverings: Corrugated sheet, slate, plain tile, frankfurter pan and others more. The range of application includes roof slopes from 15° to 45°.


Practical examples & product pictures

Our products at a glance

Flat roof duct FDD-KF

Flat roof duct FDD-KF with Øi = 100 or 160 mm
Flat roof duct FDD-KF, thermally insulated, non-combustible (A1), DN 160 with adhesive flange, stand height 410 or 475 mm.

 

Variants Øi Stand height
FDD100-KF 100 mm 410 mm
FDD160-KF 160 mm 475 mm

 

Read more …

Flat roof duct Insulating roof element FDD-IDE

Flat roof duct FDD-IDE with Øi = 100 mm
Insulating roof element thermally insulated, non-combustible (A1), DN 100 for max. insulation thickness 200 to 500 mm,
can be shortened individually to 80 mm.

 

Variants max. insulation thickness
FDD100-IDE/200 200 mm
FDD100-IDE/300 300 mm
FDD100-IDE/400 400 mm
FDD100-IDE/500 500 mm

 

Read more …

Flat roof duct insulating roof element FDD 160-IDE

Flat roof duct FDD-IDE with Øi = 160 mm

Insulating roof element thermally insulated, non-combustible (A1), DN 160 for max. insulation thickness 200 to 500 mm, can be shortened individually to 80 mm.

Variants max. insulation thickness
FDD160-IDE/200 200 mm
FDD160-IDE/300 300 mm
FDD160-IDE/400 400 mm
FDD160-IDE/500 500 mm

 

Read more …

Gooseneck duct for flat roofs SHDD assembled

Gooseneck roof duct SHDD with Øi = 100 to 300 mm.

Gooseneck roof duct with welded connection plate, designed as adhesive flange against non-pressing water according to DIN 18195 part 9, for doweling, in a flexible design incl. Drain hood, galvanised steel. Delivery is made assembled. Also available assembled in stainless steel (V2A/V4A). Only in galvanized version pivotable and swivelling.

For shipping reasons, it may occur that the shipment is performed in 2 parts (lower part, upper part)

 

Variants SHDD with Øi
SHDD100/assembled/VZ 100 mm
SHDD150/assembled/VZ 150 mm
SHDD200/assembled/VZ 200 mm
SHDD300/assembled/VZ 300 mm

 

Read more …

Gooseneck duct for flat roofs SHDD individual parts

Gooseneck duct for flat roofs SHDD with Øi = 100 to 300 mm.

Gooseneck duct with welded connection plate, designed as adhesive flange against non-pressing water according to DIN 18195 part 9, for doweling, in flexible design incl. Drain hood, galvanised steel. Delivery in individual parts with detailed assembly instructions

Variants SHDD with Øi
SHDD100/individual parts/VZ 100 mm
SHDD150/individual parts/VZ 150 mm
SHDD200/individual parts/VZ 200 mm
SHDD300/individual parts/VZ 300 mm

 

Read more …

Multiple flat roof feed-through MFD 50/70 with GPD

MFD 50/70 with GPD
Including corresponding rubber press seal GPD 68/1/ZxD
for one or more cables.

 

Variants Statement
MFD-SF/70/GPD86 SF = loose flange
MFD-DB/70/GPD86 DB = standard bitumen roofing membrane

 

Read more …

Multiple flat roof feed-through MFD 110/125 with one connection piece

MFD 110/125 with one connection piece
and a thermal shrink sleeve
Version for one cable with diameter 26-78 mm.

 

Variants Statement
MFD-SF/125/D1/80 SF = loose flang
MFD-DP/125/D1/80 DB = standard bitumen roofing membrane

 

Read more …

Multiple flat roof feed-through MFD 110/125 with three spigots

MFD 110/125 with three spigots
and three thermal shrink sleeves
Suitable for three cables with diameter 16 - 44 mm. Various dividing caps are available as accessories.
AK or sealing plug VS 46 available.

 

Variants
Statement
MFD-SF/125/D3/46 SF = loose flange
MFD-DB/125/D3/46 DB = standard bitumen roofing membrane

 

Read more …

MFD 110/125 multiple flat roof bushing with seven spigots

MFD 110/125 with seven spigotsand six thermal shrink sleeves
One nozzle is closed when delivered and can be pierced if required.
Suitable for a maximum of four cables with a diameter of 7-23 mm and a maximum of three cables with a diameter of 7-30 mm.
Various dividing caps AK or sealing plugs VS 25 or VS 32 are available as accessories.
 
 
Variants Statement
MFD-SF/125/D7/32/25 SF = loose flange
MFD-DB/125/D7/32/25 DB = standard bitumen roofing membrane
 
 

Read more …

Multiple flat roof feed-through MFD 150/160 with one connection piece

MFD 150/160 with one connection piece
and a thermal shrink sleeve
Version for one cable with diameter 34-108 mm.

 

Varianten Statement
MFD-SF/160/D1/110 SF = loose flange
MFD-DB/160/D1/110 DB = standard bitumen roofing membrane


Version for one cable with diameter 26-78 mm.

 

Varianten Statement
MFD-SF/160/D1/80 SF = loose flange
MFD-DB/160/D1/80 DB = standard bitumen roofing membrane

 

Read more …

Multiple flat roof feed-through MFD 150/160 with three spigots

MFD 150/160 with three spigots
and three thermal shrink sleeves
Suitable for three cables with diameter 22-57 mm.
Various dividing caps are available as accessories.
AK or sealing plug VS 60 available.
 
Varianten Statement
MFD-SF/160/D3/59 SF = loose flange
MFD-DB/160/D3/59 DB = standard bitumen roofing membrane

Read more …

MFD 150/160 multiple flat-roof bushing with eight spigots

MFD 150/160 with eight spigots
and four thermal shrink sleeves
Four nozzles are closed when delivered and can be pierced if required.
Suitable for a maximum of four cables with a diameter of 7-23 mm and a maximum of four cables with a diameter of 7-33 mm.
Various dividing caps AK or sealing plugs VS 25 or VS 35 are available as accessories.
 
 
Varianten Statement
MFD-SF/160/D8/35/25 SF = loose flange
MFD-DB/160/D8/35/25 DB = standard bitumen roofing membrane

Read more …

Multiple flat roof feed-through MFD 110/125 with GPD 150/WE

MFD 110/125 with GPD 150/WE
Includes associated rubber press seal GPD 150/G/2/WE110/ZxD
for one or more cables.
With standard roofing membrane:

Order-No. MFD-DP/125/GPD150/WE110/ZxD

Read more …

Multiple flat roof feed-through MFD 110/125 with GPD 150/WE

MFD 110/125 with GPD 150/WE
Includes associated rubber press seal GPD 150/G/2/WE110/ZxD
for one or more cables.
With loose flange:

Order-No. MFD-SF/125/GPD150/WE110/ZxD

Read more …

Multiple flat roof feed-through MFD 150/160 with GPD 150/WE

MFD 150/160 with GPD 150/WE
Includes associated rubber press seal GPD 150/G/2/WE110/ZxD
for one or more cables.
With standard roofing membrane:

Order-No. MFD-DB/160/GPD150/G/2/WE110/ZxD

Read more …

Multiple flat roof feed-through MFD 150/160 with GPD 150/WE

MFD 150/160 with GPD 150/WE
Includes associated rubber press seal GPD 150/G/2/WE110/ZxD
for one or more cables.
With loose flange:

Order-No. MFD-SF/160/GPD150/G/2/WE110/ZxD

Read more …

Multiple saddle roof duct MSD/110

Multiple saddle roof duct MSD 110,
For professional sealing and ducting of cables and pipes on saddle roofs
with system cover and thermal sleeve(s) for sealing cables or pipes from Ø 16 mm to Ø 78 mm
or a GPD with interchangeable insert.

Area of application:  Saddle roof with a roof pitch of 15° to 45°.
Advantages: 
  • quick and easy assembly
  • Safe sealing of cables and pipes
  • against any kind of weather
Sealing:  2 bar
Required information: Roof tile shape, colour and manufacturer

 

variants Sealing of cables and pipes
MSD110/D1/80 Connection cover with 1 connection piece and thermal sleeve for cables with Ø 26-78 mm.
MSD110/D3/46 Connection cover with 3 connection piece and thermo sleeve for cables with Ø 16-44 mm.
MSD110/D7/32/25 Connection cover with 7 connection pieces and 4 thermal sleeve for cables with Ø 7-23 mm and 3 cables with Ø 7-30 mm. One socket is closed when delivered and can be broken through if required.
MSD110/GPD150/G/60//WE110/V2A/EPDM Rubber press seal 150
GPD150/G/60/WE110/V2A/EPDM
with interchangeable insert DN 110 mm
12 x 16 mm (1/2" cable)
6 x 11 mm (RG8 cable)
Standard cable distribution for telecommunications and mobile communications

Read more …

Multiple saddle roof duct MSD-Universal/125

Multiple saddle roof bushing MSD-Universal/125,
universal gabled roof penetration for all types of roof tiles, with system cover and thermal socket(s) for sealing cables or pipes from Ø 16 mm to Ø 78 mm or a GPD with interchangeable insert.

 

 
Area of application:  Saddle roof with a roof pitch of 15° to 45°.
Advantages: 
  • quick and easy assembly
  • Safe sealing of cables and pipes
  • against any kind of weather
Sealing:  2 bar
Required information: colour

 

variants Sealing of cables and pipes
MSD-Universal/125/D1/80 Connection cover with 1 connection piece and thermal sleeve for cables with Ø 26-78 mm.
MSD-Universal/125/D3/46 Connection cover with 3 connection piece and thermo sleeve for cables with Ø 16-44 mm.
MSD-Universal/125/D7/32/25 Connection cover with 7 connection pieces and 4 thermal sleeve for cables with Ø 7-23 mm and 3 cables with Ø 7-30 mm. One socket is closed when delivered and can be broken through if required.
MSD-Universal/125/GPD150/G/60//WE110/V2A/EPDM Rubber press seal 150
GPD150/G/60/WE110/V2A/EPDM
with interchangeable insert DN 110 mm
12 x 16 mm (1/2" cable)
6 x 11 mm (RG8 cable)
Standard cable distribution for telecommunications and mobile communications

Read more …

Trapezoidal sheet metal roof duct TDD

Trapezoidal sheet metal roof duct for one opening with Øi 86 to 152  mm

F = Covering flange on top of roof Øa = 106 to 172 mm
(Z) = Number of cables
(D) = Diameter of cables Maximum

 

Variants Opening with Øi F (see above) Maximum occupancy
TDD86/60/F/WE/V2A/EPDM
(Z)x(D)
86 mm 106 mm e.g. 9 cables up to 8 mm
TDD102/60/F/WE/V2A/EPDM
(Z)x(D)
102 mm 122 mm e.g. 16 cables up to 8 mm
TDD127/60/F/WE/V2A/EPDM
(Z)x(D)
127 mm 147 mm e.g. 25 cables up to 8 mm
TDD152/60/F/WE/V2A/EPDM
(Z)x(D)
152 mm 172 mm e.g. 40 cables up to 8 mm

 

Read more …