Roof ducts
Multiple saddle roof duct, multiple flat roof duct
Multiple saddle roof ducts MSD are used to lay cables through saddle roofs, for example, to mobile phone systems, photovoltaic systems, solar systems or TV antennas.
You will receive UGA multiple saddle roof ducts suitable for almost all roof coverings: Corrugated sheet, slate, plain tile, frankfurter pan and others more. The range of application includes roof slopes from 15° to 45°.
Downloads & Information
Practical examples & product pictures
Our products at a glance
Flat roof duct FDD-KF
| Variants | Øi | Stand height |
| FDD100-KF | 100 mm | 410 mm |
| FDD160-KF | 160 mm | 475 mm |
Flat roof duct Insulating roof element FDD-IDE
| Variants | max. insulation thickness |
| FDD100-IDE/200 | 200 mm |
| FDD100-IDE/300 | 300 mm |
| FDD100-IDE/400 | 400 mm |
| FDD100-IDE/500 | 500 mm |
Flat roof duct insulating roof element FDD 160-IDE
Flat roof duct FDD-IDE with Øi = 160 mm
Insulating roof element thermally insulated, non-combustible (A1), DN 160 for max. insulation thickness 200 to 500 mm, can be shortened individually to 80 mm.
| Variants | max. insulation thickness |
| FDD160-IDE/200 | 200 mm |
| FDD160-IDE/300 | 300 mm |
| FDD160-IDE/400 | 400 mm |
| FDD160-IDE/500 | 500 mm |
Gooseneck duct for flat roofs SHDD assembled
Gooseneck roof duct SHDD with Øi = 100 to 300 mm.
Gooseneck roof duct with welded connection plate, designed as adhesive flange against non-pressing water according to DIN 18195 part 9, for doweling, in a flexible design incl. Drain hood, galvanised steel. Delivery is made assembled. Also available assembled in stainless steel (V2A/V4A). Only in galvanized version pivotable and swivelling.
For shipping reasons, it may occur that the shipment is performed in 2 parts (lower part, upper part)
| Variants | SHDD with Øi |
| SHDD100/assembled/VZ | 100 mm |
| SHDD150/assembled/VZ | 150 mm |
| SHDD200/assembled/VZ | 200 mm |
| SHDD300/assembled/VZ | 300 mm |
Gooseneck duct for flat roofs SHDD individual parts
Gooseneck duct for flat roofs SHDD with Øi = 100 to 300 mm.
Gooseneck duct with welded connection plate, designed as adhesive flange against non-pressing water according to DIN 18195 part 9, for doweling, in flexible design incl. Drain hood, galvanised steel. Delivery in individual parts with detailed assembly instructions
| Variants | SHDD with Øi |
| SHDD100/individual parts/VZ | 100 mm |
| SHDD150/individual parts/VZ | 150 mm |
| SHDD200/individual parts/VZ | 200 mm |
| SHDD300/individual parts/VZ | 300 mm |
Multiple flat roof feed-through MFD 50/70 with GPD
MFD 50/70 with GPD
Including corresponding rubber press seal GPD 68/1/ZxD
for one or more cables.
| Variants | Statement |
| MFD-SF/70/GPD86 | SF = loose flange |
| MFD-DB/70/GPD86 | DB = standard bitumen roofing membrane |
Multiple flat roof feed-through MFD 110/125 with one connection piece
MFD 110/125 with one connection piece
and a thermal shrink sleeve
Version for one cable with diameter 26-78 mm.
| Variants | Statement |
| MFD-SF/125/D1/80 | SF = loose flang |
| MFD-DP/125/D1/80 | DB = standard bitumen roofing membrane |
Multiple flat roof feed-through MFD 110/125 with three spigots
MFD 110/125 with three spigots
and three thermal shrink sleeves
Suitable for three cables with diameter 16 - 44 mm. Various dividing caps are available as accessories.
AK or sealing plug VS 46 available.
| Variants |
Statement
|
| MFD-SF/125/D3/46 | SF = loose flange |
| MFD-DB/125/D3/46 | DB = standard bitumen roofing membrane |
MFD 110/125 multiple flat roof bushing with seven spigots
One nozzle is closed when delivered and can be pierced if required.
Suitable for a maximum of four cables with a diameter of 7-23 mm and a maximum of three cables with a diameter of 7-30 mm.
Various dividing caps AK or sealing plugs VS 25 or VS 32 are available as accessories.
| Variants | Statement |
| MFD-SF/125/D7/32/25 | SF = loose flange |
| MFD-DB/125/D7/32/25 | DB = standard bitumen roofing membrane |
Multiple flat roof feed-through MFD 150/160 with one connection piece
MFD 150/160 with one connection piece
and a thermal shrink sleeve
Version for one cable with diameter 34-108 mm.
| Varianten | Statement |
| MFD-SF/160/D1/110 | SF = loose flange |
| MFD-DB/160/D1/110 | DB = standard bitumen roofing membrane |
Version for one cable with diameter 26-78 mm.
| Varianten | Statement |
| MFD-SF/160/D1/80 | SF = loose flange |
| MFD-DB/160/D1/80 | DB = standard bitumen roofing membrane |
Multiple flat roof feed-through MFD 150/160 with three spigots
Suitable for three cables with diameter 22-57 mm.
Various dividing caps are available as accessories.
AK or sealing plug VS 60 available.
| Varianten | Statement |
| MFD-SF/160/D3/59 | SF = loose flange |
| MFD-DB/160/D3/59 | DB = standard bitumen roofing membrane |
MFD 150/160 multiple flat-roof bushing with eight spigots
Four nozzles are closed when delivered and can be pierced if required.
Suitable for a maximum of four cables with a diameter of 7-23 mm and a maximum of four cables with a diameter of 7-33 mm.
Various dividing caps AK or sealing plugs VS 25 or VS 35 are available as accessories.
| Varianten | Statement |
| MFD-SF/160/D8/35/25 | SF = loose flange |
| MFD-DB/160/D8/35/25 | DB = standard bitumen roofing membrane |
Multiple flat roof feed-through MFD 110/125 with GPD 150/WE
for one or more cables.
With standard roofing membrane:
Order-No. MFD-DP/125/GPD150/WE110/ZxD
Multiple flat roof feed-through MFD 110/125 with GPD 150/WE
MFD 110/125 with GPD 150/WE
Includes associated rubber press seal GPD 150/G/2/WE110/ZxD
for one or more cables.
With loose flange:
Order-No. MFD-SF/125/GPD150/WE110/ZxD
Multiple flat roof feed-through MFD 150/160 with GPD 150/WE
MFD 150/160 with GPD 150/WE
Includes associated rubber press seal GPD 150/G/2/WE110/ZxD
for one or more cables.
With standard roofing membrane:
Order-No. MFD-DB/160/GPD150/G/2/WE110/ZxD
Multiple flat roof feed-through MFD 150/160 with GPD 150/WE
MFD 150/160 with GPD 150/WE
Includes associated rubber press seal GPD 150/G/2/WE110/ZxD
for one or more cables.
With loose flange:
Order-No. MFD-SF/160/GPD150/G/2/WE110/ZxD
Multiple saddle roof duct MSD/110
Multiple saddle roof duct MSD 110,
For professional sealing and ducting of cables and pipes on saddle roofs
with system cover and thermal sleeve(s) for sealing cables or pipes from Ø 16 mm to Ø 78 mm
or a GPD with interchangeable insert.
| Area of application: | Saddle roof with a roof pitch of 15° to 45°. |
| Advantages: |
|
| Sealing: | 2 bar |
| Required information: | Roof tile shape, colour and manufacturer |
| variants | Sealing of cables and pipes |
| MSD110/D1/80 | Connection cover with 1 connection piece and thermal sleeve for cables with Ø 26-78 mm. |
| MSD110/D3/46 | Connection cover with 3 connection piece and thermo sleeve for cables with Ø 16-44 mm. |
| MSD110/D7/32/25 | Connection cover with 7 connection pieces and 4 thermal sleeve for cables with Ø 7-23 mm and 3 cables with Ø 7-30 mm. One socket is closed when delivered and can be broken through if required. |
| MSD110/GPD150/G/60//WE110/V2A/EPDM | Rubber press seal 150 GPD150/G/60/WE110/V2A/EPDM with interchangeable insert DN 110 mm 12 x 16 mm (1/2" cable) 6 x 11 mm (RG8 cable) Standard cable distribution for telecommunications and mobile communications |
Multiple saddle roof duct MSD-Universal/125
Multiple saddle roof bushing MSD-Universal/125,
universal gabled roof penetration for all types of roof tiles, with system cover and thermal socket(s) for sealing cables or pipes from Ø 16 mm to Ø 78 mm or a GPD with interchangeable insert.
| Area of application: | Saddle roof with a roof pitch of 15° to 45°. |
| Advantages: |
|
| Sealing: | 2 bar |
| Required information: | colour |
| variants | Sealing of cables and pipes |
| MSD-Universal/125/D1/80 | Connection cover with 1 connection piece and thermal sleeve for cables with Ø 26-78 mm. |
| MSD-Universal/125/D3/46 | Connection cover with 3 connection piece and thermo sleeve for cables with Ø 16-44 mm. |
| MSD-Universal/125/D7/32/25 | Connection cover with 7 connection pieces and 4 thermal sleeve for cables with Ø 7-23 mm and 3 cables with Ø 7-30 mm. One socket is closed when delivered and can be broken through if required. |
| MSD-Universal/125/GPD150/G/60//WE110/V2A/EPDM | Rubber press seal 150 GPD150/G/60/WE110/V2A/EPDM with interchangeable insert DN 110 mm 12 x 16 mm (1/2" cable) 6 x 11 mm (RG8 cable) Standard cable distribution for telecommunications and mobile communications |
Trapezoidal sheet metal roof duct TDD
Trapezoidal sheet metal roof duct for one opening with Øi 86 to 152 mm
| Variants | Opening with Øi | F (see above) | Maximum occupancy |
| TDD86/60/F/WE/V2A/EPDM (Z)x(D) |
86 mm | 106 mm | e.g. 9 cables up to 8 mm |
| TDD102/60/F/WE/V2A/EPDM (Z)x(D) |
102 mm | 122 mm | e.g. 16 cables up to 8 mm |
| TDD127/60/F/WE/V2A/EPDM (Z)x(D) |
127 mm | 147 mm | e.g. 25 cables up to 8 mm |
| TDD152/60/F/WE/V2A/EPDM (Z)x(D) |
152 mm | 172 mm | e.g. 40 cables up to 8 mm |
